High performance positioning with combined GPS and GLONASS
The large colour touch-screen display and intuitive graphical user interface makes operation both visually appealing and easy. The multitude of interfaces make the system highly appropriate for integration into modern networked bridge solutions. The network interface may also be used to connect several systems in redundant configuration or to add additional passive displays.
Technical specifications
Waypoints: 4000
Routes: 128 (max 512 waypoints in each route)
Functions: Support for additional read only displays and redundant systems.
Integrity: RAIM and Heartbeat Monitoring
Power supply: Sensor; 12/24 VDC CDU; 12/24 VDC
Power Consumption: Sensors; 2.0 W (GPS), 2.7W(DGPS). Display 13W
GNSS receiver
- 270 channel combined L1 GPS and L1 GLONASS
- DGNSS: SBAS, externally input RTCM-104 or Beacon option
- Update rate: 1 Hz default, 5 Hz max
- Position accuracy: GPS*; 3m, DGPS** 1m (2D RMS)
- Cold start: 1 min typical
- Reacquisition: <1s
IALA Beacon receiver add-on (DGNSS version)
- Dual receiver: Manual or Automatic tuning
- Frequency: 283.5 to 325.0 kHz
- MSK Bit Rates: 0, 100, 200 bps
- Cold Start Time: < 1 minute typical
- Reacquisition: < 2 seconds typical
- Sensitivity: 25 µV/m for 6 dB SNR @ 200 bps
Electrical interfaces (CDU + sensor)
- Ethernet 10/100 Mbit (LWE IEC 61162-450)
- 3 RS-422 I/O (User configurable) NMEA/IEC 61162-1 Ed. 4
- 1 RS-422 Output (NMEA/IEC61162-4 Ed.4) only
- 3 Digital In, 3 Digital Out
- USB Host 2.0
- SDHC Reader
- Speed log output
- Alarm Binary Out Port
- Alarm Acknowledge Binary Port
